Grabs

Product Details:

We provide a wide range of Grabs to handle a variety of bulk material in Ports, Ships, manufacturers of Cranes and Construction Machinery, Steel Mills, Waste-To-Energy Plants and Recycling/Scrap Handling Industries

Product Details:

peration  1. Fit the rubber pads arms to the foot of the grab (if not already fitted) and attach with two safety lynch pins per pad arm. 2. Insert the lifting pin from the Self Locating Yoke (separate attachment) or the swivel hook (separate attachment) through the lifting eye of the Scissor grab. 3. With the unit in the locked open position proceed towards your intend pack (if the unit is not in the open position fully close the grab and lift again). 4. Adjust the actuator wheels (Model ISG-5 only) so that when the white nylon wheels make contact with the top of the pack the rubber pads arms are positioned within the bottom half of the bottom row of blocks (the actuator wheels are positioned by retracting the sprung loaded pin from the positioning hole then slide the actuator wheel assembly to its new desired position ensuring that both sides are in the same corresponding holes). 5. Lift the grab so that it is positioned directly above the intend pack and lower the grab until the actuator wheels are resting on the pack (do not slam the grab down on the pack) and the grab has fully closed. Once closed begin to lift, the rubber pad arms will then begin to close on to the bottom block of the pack, continue to lift until the grab has lifted the pack clear of the ground/pallet. 6. Once the pack is clear slide a restraint net (optional extra) under the pack and hook the net into the four profiled restraint net hooks in the main frame (this must be adhered to if lifting overhead). 7. Drive the forklift to the desire position and then lower the grab until the pack comes into contact with a firm surface and actuator wheels once again resting on the pack (remove the net prior to this if fitted). The rubber pads arms will now have released from the bottom block, but then continue to lower until the grab has fully closed. 8. Lift the grab clear of the pack and the unit will now be in its fully locked open position ready for the next operation.  Maintenance 1. The Scissor Grab should be inspected weekly for general condition with particular attention paid to: A - All weld points B - Wear & distortion of lifting eyes and rubber pad arms C - Any damaged components  D - Locks & latches E - Security of all nuts and bolts F – Security and condition of Rubber Pads 2. General surface rusting especially in critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis. 3. All hinges, latches, locks, hinge points and springs must be kept lightly greased. 4. Damage or failure must be reported or rectified immediately prior to re-use of the grab. 

Product Details:

Designed to lift, move and release numerous types of slabs, blocks and single or double layer kerb packs safely on a building site or yard. Fully mechanically operated via the forklift (without the driver leaving the safety of his seat) or via an overhead crane / HIAB.  peration  1. Fit the rubber pads arms to the foot of the grab (if not already fitted) and attach with two safety lynch pins per pad arm. 2. Insert the lifting pin from the Self Locating Yoke (separate attachment) or the swivel hook (separate attachment) through the lifting eye of the Scissor grab. 3. With the unit in the locked open position proceed towards your intend pack (if the unit is not in the open position fully close the grab and lift again). 4. Adjust the actuator wheels (Model ISG-5 only) so that when the white nylon wheels make contact with the top of the pack the rubber pads arms are positioned within the bottom half of the bottom row of blocks (the actuator wheels are positioned by retracting the sprung loaded pin from the positioning hole then slide the actuator wheel assembly to its new desired position ensuring that both sides are in the same corresponding holes). 5. Lift the grab so that it is positioned directly above the intend pack and lower the grab until the actuator wheels are resting on the pack (do not slam the grab down on the pack) and the grab has fully closed. Once closed begin to lift, the rubber pad arms will then begin to close on to the bottom block of the pack, continue to lift until the grab has lifted the pack clear of the ground/pallet. 6. Once the pack is clear slide a restraint net (optional extra) under the pack and hook the net into the four profiled restraint net hooks in the main frame (this must be adhered to if lifting overhead). 7. Drive the forklift to the desire position and then lower the grab until the pack comes into contact with a firm surface and actuator wheels once again resting on the pack (remove the net prior to this if fitted). The rubber pads arms will now have released from the bottom block, but then continue to lower until the grab has fully closed. 8. Lift the grab clear of the pack and the unit will now be in its fully locked open position ready for the next operation.  Maintenance 1. The Scissor Grab should be inspected weekly for general condition with particular attention paid to: A - All weld points B - Wear & distortion of lifting eyes and rubber pad arms C - Any damaged components  D - Locks & latches E - Security of all nuts and bolts F – Security and condition of Rubber Pads 2. General surface rusting especially in critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis. 3. All hinges, latches, locks, hinge points and springs must be kept lightly greased. 4. Damage or failure must be reported or rectified immediately prior to re-use of the grab. 5. This product is certified for six (6) months from the date of manufacture after which it is the customer’s responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by the HSE.   

Product Details:

heavy-duty 5 fingers rock grab offers unmatched versatility for all grappling applications. Its unique configuration allows ultimate flexibility and uses around work sites, demolition, farms or any project that requires pinpoint pick-up accuracy.

Applications Rock grab is used for worksites, demolition or farms or any project that requires pinpoint pick-up accuracy.

Product Details:

log grapple having a pair of grapple arms each supported on a head by a drive link or lever and a driven link. The levers are pivotally supported between their ends on a common central pivot on said head and the driven links are each pivotally supported on said head outboard of the common lever pivot. Each link and lever then cross to define an X-linkage with the lower ends pivotally connected to the upper end of one grapple arm, with the driven link connections inboard of the lever connections. A drive means then rotates the upper free ends of the levers to relatively close the grapple arms, then lifting the arm ends to securely embrace logs received therebetween.

Additional Information:

• Production Capacity: 3 in a month
• Delivery Time: 15 days
• Packaging Details: Yes.

Product Details:

Block Grab Features:

• Can handle common building packs of blocks, bricks and kerbs up to a SWL of 2200kg
• Compatible with a wide range of carriers; forklifts, telehandlers, cranes, and excavators
• Automatic catch mechanism enables a single operator to stack or unstack secure loads
• Height adjustment supports
• Lifting eye for attaching to crane or hook via a drop chain
• External handles for ease of operation

Block Grab Benefits:

• Fully certified
• Fully complies with the most stringent safety requirements
• Removes the need for pallets
• Enhanced grip on uneven surfaces
• Minimal maintenance requirements

Additional Information:

• Production Capacity: 1 in a week
• Delivery Time: 7 days

Product Details:

• Applications include the lifting and manipulating of paving slabs, causeway edging, furnace bricks, bollards, roof tiles, cladding, and moulds; these can now all be handled with effortless ease.

Additional Information:

• Production Capacity: 10 IN A WEEK
• Delivery Time: 7 DAYS
• Packaging Details: YES

Product Details:

Hydraulic grapple is an excavator attachment that looks like the gaping mouth of a large animal. This excavator attachment allows the operator to pick up heavy material like rocks, logs, and stumps. It is a dynamic piece of equipment capable of lifting up to 23 tons, making it ideal for moving stuff around the site.
A hydraulic grapple is basically a series of hydraulically driven steel fingers mounted on top of an arm. The fingers open and close with a powerful hydraulic cylinder, creating a solid grip on an object. This allows operators to pick up large items without much effort or complex movements.

Product Details:

These Brick lifter Attachement are Attached in Forkfit and work in Hydraulic and mechanical mode
These are fast and Convient and saves lot of Time for Loading and Unloading of Blocks.

Product Details:

Mechanical Boulder Grab RS-BG is purely mechanical, Suitable for handling bolder. Stones of almost all shapes can be lifted and laid to the exact millimeter. With lifting eye can be attached on any lifting devices. lifting capacity of 1500kg and gripping ranges 0 to 950 mm 

Additional Information:

• Production Capacity: 4 in a month
• Delivery Time: 15 days
• Packaging Details: Yes

Product Details:

We hold expertise in offering a wide range of Cactus Grabs. Owing to its precise design, accurate dimensions and longer functional life, these equipments are extensively recommended by various numbers of clients. These quality approved products are reasonable, safe & reliable and it is not liable to damage coils. The offered range is quality tested on various parameters of quality to make sure that clients receive defect-free products. Handles a wide range of coil sizes and capacities, Grip jaws conform to coil sizes

Product Details:

We offer a wide range of mechanical action scissor grabs, designed to lift a variety of loads including bricks, blocks, kerbs and slabs.

Grabs are purely mechanical and require no hydraulic or electrical services. They can be used with lorry cranes, tower cranes and fork lift trucks (using a yoke).

Features

• All grabs are certified and tested to 100% over their safe working load and conform to latest EC directives.
• In addition to the standard scissor grabs, we can also produce specials to suit specific loads.
• Spare pads for all units are available
• For other spares ask for parts breakdown.
• All grabs are supplied with suspension eye as standard.

Additional Information:

• Production Capacity: 50 per week
• Delivery Time: 10 days
• Packaging Details: Yes

Product Details:

• High tensile steel welded construction.
• Simple and reliable operation with minimal maintenance.
• A safer and easy way to move large rocks.
• Suitable for handling boulders and stones of almost all shapes.
• The greater the weight the harder the grip of the tongs.
• An actuator allows the clamp to grab and release automatically during each cycle. 

Product Details:

 Brick & Block Scissor Grab is designed to mechanically lift, move and release numerous types of block and brick packs in a safe manner within the factory or on the building site. With an automatic mechanism, the grab works perfectly combined with an overhead crane.

Additional Information:

• Production Capacity: 2 in a month
• Delivery Time: 15 days

Product Details:

Keeping in mind the precise demands of clients, we offer a wide range of Sheet Pack Lifters. These are manufactured using best quality components and following international industrial standards. Our products are acclaimed for their high work capacity and effective performance. These are acclaimed for their optimum strength and top notch performance. We ensure top notch performance

Additional Information:

• Item Code: 8429
• Production Capacity: 6 in a month

Product Details:

mechanical lifters are designed to safely lift concrete pipes. The lifter does not require additional hydraulics. The operator is able to use the pipe lifter to grab, lift and move pipes without assistance. The narrow profile allows for the easy installation of concrete pipes into tight trenches.

Additional Information:

• Production Capacity: 15 days
• Delivery Time: 15 days

Product Details:

The tong is a type of machine that modifies and transforms input forces into desired output forces.  Although tongs come in a multitude of shapes and configurations, most of them can be broken down into a simple “fourbar” linkage for analyzing their movement and forces.  Although each material handling application will require specific analytical calculations to determine the proper structural configuration of the tong, a simple static analysis of a tong will show important relationships that can be helpful when selecting the proper tong for your application.  Figure 1 shows a simple pressure type tong grab; the specific loads on the links have been exploded for illustration.  Our goal is to perform a summation of moments around the center pin (point Z) to determine the equation for the force on the load 

Additional Information:

• Production Capacity: one in a week
• Delivery Time: week
• Packaging Details: Yes

Product Details:

Designed for stone fabricators, Spreader Beam features fork-access slots that provide secure way of engaging and lifting beam with forklift. Made of heavy-duty steel, beam measures 96 x 11½ in. and has max load capacity of 10,000 lb. Unit accommodates slings or straps up to 5 in. wide, which can be positioned and secured on bar in one of multiple slot positions. Also suitable for lifting with overhead crane, beam has reinforced 1¼ in. thick swivel hook attachment point at peak of bar

Additional Information:

• Production Capacity: one in awwek
• Delivery Time: 15 days
• Packaging Details: Yes

Product Details:

Keeping in mind the precise demands of clients, we offer a wide range of Ingot/ Billet Lifters. These are available with us in all standard sizes, dimensions and technical specifications following the requirements of clients. Owing to its high tensile strength and robustness, these devices are extensively preferred by various numbers of clients. We ensure longer functional life of our devices.

Product Details:

We hold expertise in offering a wide range of Cactus Grabs. Owing to its precise design, accurate dimensions and longer functional life, these equipments are extensively recommended by various numbers of clients. These quality approved products are reasonable, safe & reliable and it is not liable to damage coils. The offered range is quality tested on various parameters of quality to make sure that clients receive defect-free products. Handles a wide range of coil sizes and capacities, Grip jaws conform to coil sizes

Product Details:

The technically mature brick stack grapples are the ideal crane tools for the handling of palletized but also not palletized goods.
The adjustable plunge depths and the optimized opening widths allow loading of individual concrete elements as well as complete brick pallets.
Due to the low-wear rubber inserts in the pressure rails, the brick stack grapples are particularly easy to maintain.

• Highest safety
• Fixed or adjustable plunge depths
• Perfectly adapted to the material to be manipulated due to the use of different rubber inserts and lengths

Additional Information:

• Production Capacity: 1 in a month
• Delivery Time: 20 days

Product Details:

Mechanical Boulder RS-BG is purely mechanical, Suitable for handling bolder. Stones of almost all shapes can be lifted and laid to the exact millimeter. With lifting eye can be attached on any lifting devices. lifting capacity of 1500kg and gripping ranges 0 to 950 mm 

Additional Information:

• Production Capacity: 4 in month
• Delivery Time: 15 Days
• Packaging Details: Yes.

Product Details:

The hydraulic tyre handlers / tyre manipulators (Easy Gripper) and the tyre stackers (Easy Stacker) are designed to save time and resources as well as improve occupational health, ergonomic working environment, and safety.

The Easy Gripper mechanize the task of handling OTR tyres, in order to minimize risk and time for maintenance, and maximizing the availability. The Easy Gripper and Easy Stackers hold the tyre with a firm grip, tilt and rotate it in different angles and transport it to a different working area or equipment workshop.

A wide product range are available, depending on the weight and size of the tyres to be handled, the operations to be performed and the characteristics of the carrier. The Easy Gripper requires a carrier, such as a forklift, a front loader, a telehandler, or a truck crane. And the requires a stacker or a forklift as carrier.

Product Details:

Portable Hydralic Cable Drum Lifting Jack:Versatile and vertically adjustable drum axle jaw therefore minimum stroke to accomodate ranges of drums,Heavy duty ground plate and solid trusts fitted with wheels and complete with spindle and fixing clamps.

Product Details:

Keeping in mind the diverse requirements if our clients we are involved in offering a wide range of Scrap Charging Bucket. Offered Scrap Charging Buckets are manufactured by our expert engineers using sophisticated machinery based on latest technology. These can be parked on the plant floor without any supporting structure or stand. Moreover, we assure our clients to deliver these products in given period of time.

Product Details:

We introduce ourselves as eminent manufacturer, trader and supplier of Construction Mini Lift. The given mini lift is designed with high grade raw material and latest technology in accordance with the set norms of industry. Our mini lift is inspected against various parameters of quality so as to ensure the flawless deliveries. Moreover, this mini lift can also be customized in accordance with the customer’s demand.

Features:

• Rigid design
• High efficiency
• Require less maintenance

Additional Information:

• Production Capacity: ready
• Delivery Time: Immediate
• Packaging Details: included